"Ultimate Tracker Support" (UTS) from Resistance released
category: general [glöplog]
Hi,
after some months of development, I'm proud to present the package "Ultimate Tracker Support" (UTS) from Resistance: http://aminet.net/util/cli/RSE-UTS.lha
A brief overview:
This package includes five different Shell tools for Amiga tracker modules:
- WhichMOD V.1.4 detects main characteristics of standard tracker modules.
- UST2PT V.1.3 converts Ultimate Soundtracker into Protracker modules.
- OST2PT V.1.3 converts old Soundtracker into Protracker modules.
- ST2PT V.1.2 converts Soundtracker into Protracker modules.
- SplitMOD V.1.9 splits standard modules into song and samples data files.
Sixteen different replay routines for 000/0x0 CPUs as assembler sourcecodes:
- UST-Replay27_000_0x0 V.2.0 Ultimate Soundtracker
- DST-Replay6_000_0x0 V.1.0 (old) DOC Soundtracker
- DST-Replay9_000_0x0 V.1.0
- ST-Replay2.2_000_0x0 V.4.0 (old) Soundtracker
- ST-Replay2.4_000_0x0 V.4.1 Soundtracker
- NT-Replay2.0_000_0x0 V.4.0 Noisetracker
- PT-Replay2.3a_000_0x0 V.4.0 Protracker
- PT-Replay3.0b_000_0x0 V.3.8
Overview Tracker Features V.1.0
- I've added a table with different tracker features and a classification of the
trackers by their effect command formats as a pdf-file and a png-picture for
the use with multiview.
Some words about the included sourcecodes...
The main focus is on the Amiga tracker replay routines. Any other parts like
turning the system off and on, saving the content of hardware registers
or enabling/disabling interrupts are NOT part of the sources.
The aim is to provide you 100% documented and standardized replay routines
as assembler sourcecodes for different Amiga trackers.
All routines are based on the Protracker 2.3a/3.0b original replay routines.
For every replay routine there's an optimized 68000 and 680x0 version which
is very fast.
Feel free to do further optimizations. ;-)
I've decided to include only the latest version of a replay routine before
fundamental changes happened, like:
- Changing and introducing new effect commands with DOC Soundtracker 4,
DOC Soundtracker 9, Master Soundtracker 1.0, Soundtracker 2.0,
Soundtracker 2.3, Noisetracker 1.0 and Protracker 1.0
- Changing from raster independent to raster dependent replay with
Master Soundtracker 1.0 and Soundtracker 2.0
- Introducing 31 instruments with Soundtracker 2.3
- Changing the interpretation of the repeat point of loop samples from bytes
to words with Soundtracker 2.5, Noisetracker 1.0 and expanding the effect
commands
- Adding extended commands with Protracker 1.0
- Changing from raster dependent to raster independent replay with
Protracker 1.0
- Adding new commands and features with Protracker 3.0
The following trackers are supported by the routines:
- UST-Replay27 V.2.0
* Ultimate Soundtracker 1.21 - the mother of all trackers =)
* Ultimate Soundtracker 1.8
* Ultimate Soundtracker 2.0
- DST-Replay6 V.1.0
* (old) Soundtracker 1
* (old) Soundtracker 2
* (old) Soundtracker 3
* (old) DOC Soundtracker 4
* (old) DOC Soundtracker 5
* (old) DOC Soundtracker 6
- DST-Replay9 V.1.0
* (old) DOC Soundtracker 9
* (old) Master Soundtracker 1.0
- ST-Replay2.2 V.4.0
* (old) Soundtracker 2.0
* (old) Soundtracker 2.1
* (old) Soundtracker 2.2
- ST-Replay2.4 V.4.1
* Soundtracker 2.3
* Soundtracker 2.4
- NT-Replay2.0 V.4.0
* Noisetracker 2.x
* Startrekker 1.x
- PT-Replay2.3a V.4.0
* Soundtracker 2.5
* Soundtracker 2.6
* Noisetracker 1.x
* Protracker 1.x
* Protracker 2.x
- PT-Replay3.0b V.3.8
* Soundtracker 2.5
* Soundtracker 2.6
* Noisetracker 1.x
* Protracker 1.x
* Protracker 2.x
* Protracker 3.x
Have fun with it. ;-)
Dissident^Resistance
after some months of development, I'm proud to present the package "Ultimate Tracker Support" (UTS) from Resistance: http://aminet.net/util/cli/RSE-UTS.lha
A brief overview:
This package includes five different Shell tools for Amiga tracker modules:
- WhichMOD V.1.4 detects main characteristics of standard tracker modules.
- UST2PT V.1.3 converts Ultimate Soundtracker into Protracker modules.
- OST2PT V.1.3 converts old Soundtracker into Protracker modules.
- ST2PT V.1.2 converts Soundtracker into Protracker modules.
- SplitMOD V.1.9 splits standard modules into song and samples data files.
Sixteen different replay routines for 000/0x0 CPUs as assembler sourcecodes:
- UST-Replay27_000_0x0 V.2.0 Ultimate Soundtracker
- DST-Replay6_000_0x0 V.1.0 (old) DOC Soundtracker
- DST-Replay9_000_0x0 V.1.0
- ST-Replay2.2_000_0x0 V.4.0 (old) Soundtracker
- ST-Replay2.4_000_0x0 V.4.1 Soundtracker
- NT-Replay2.0_000_0x0 V.4.0 Noisetracker
- PT-Replay2.3a_000_0x0 V.4.0 Protracker
- PT-Replay3.0b_000_0x0 V.3.8
Overview Tracker Features V.1.0
- I've added a table with different tracker features and a classification of the
trackers by their effect command formats as a pdf-file and a png-picture for
the use with multiview.
Some words about the included sourcecodes...
The main focus is on the Amiga tracker replay routines. Any other parts like
turning the system off and on, saving the content of hardware registers
or enabling/disabling interrupts are NOT part of the sources.
The aim is to provide you 100% documented and standardized replay routines
as assembler sourcecodes for different Amiga trackers.
All routines are based on the Protracker 2.3a/3.0b original replay routines.
For every replay routine there's an optimized 68000 and 680x0 version which
is very fast.
Feel free to do further optimizations. ;-)
I've decided to include only the latest version of a replay routine before
fundamental changes happened, like:
- Changing and introducing new effect commands with DOC Soundtracker 4,
DOC Soundtracker 9, Master Soundtracker 1.0, Soundtracker 2.0,
Soundtracker 2.3, Noisetracker 1.0 and Protracker 1.0
- Changing from raster independent to raster dependent replay with
Master Soundtracker 1.0 and Soundtracker 2.0
- Introducing 31 instruments with Soundtracker 2.3
- Changing the interpretation of the repeat point of loop samples from bytes
to words with Soundtracker 2.5, Noisetracker 1.0 and expanding the effect
commands
- Adding extended commands with Protracker 1.0
- Changing from raster dependent to raster independent replay with
Protracker 1.0
- Adding new commands and features with Protracker 3.0
The following trackers are supported by the routines:
- UST-Replay27 V.2.0
* Ultimate Soundtracker 1.21 - the mother of all trackers =)
* Ultimate Soundtracker 1.8
* Ultimate Soundtracker 2.0
- DST-Replay6 V.1.0
* (old) Soundtracker 1
* (old) Soundtracker 2
* (old) Soundtracker 3
* (old) DOC Soundtracker 4
* (old) DOC Soundtracker 5
* (old) DOC Soundtracker 6
- DST-Replay9 V.1.0
* (old) DOC Soundtracker 9
* (old) Master Soundtracker 1.0
- ST-Replay2.2 V.4.0
* (old) Soundtracker 2.0
* (old) Soundtracker 2.1
* (old) Soundtracker 2.2
- ST-Replay2.4 V.4.1
* Soundtracker 2.3
* Soundtracker 2.4
- NT-Replay2.0 V.4.0
* Noisetracker 2.x
* Startrekker 1.x
- PT-Replay2.3a V.4.0
* Soundtracker 2.5
* Soundtracker 2.6
* Noisetracker 1.x
* Protracker 1.x
* Protracker 2.x
- PT-Replay3.0b V.3.8
* Soundtracker 2.5
* Soundtracker 2.6
* Noisetracker 1.x
* Protracker 1.x
* Protracker 2.x
* Protracker 3.x
Have fun with it. ;-)
Dissident^Resistance
Hi,
again an update of the "Ultimate Tracker Support" (UTS) from Resistance: http://aminet.net/util/cli/RSE-UTS.lha
V.1.5 - Brief overview of the changes
- Replay routines:
* NT-Replay2.0_000_0x0 V.4.1
Now "Tone Portamento" doesn't call CheckMoreEffects anymore, if
wanted period equals note period. I didn't consider this special
case of the original Noisetracker/Startrekker replay routine yet.
* PT-Replay2.3a_000_0x0 V.4.1
Retrig note / Note Delay interrupt routine improved and optimized.
* PT-Replay2.4_000_0x0 V.1.0 (new)
Based on version 2.3, using the audio interrupts for rewriting the
audio location and length registers makes a timer wait superfluous.
This guarantees a smooth replay of loop samples with a repeat point
of NULL instead of the usual cracking sound generated by the first
cleared sample data word.
* PT-Replay3.0b_000_0x0 V.3.9
Retrig note / Note Delay interrupt routine improved and optimized.
* PT-Replay3.1_000_0x0 V.1.0 (new)
Based on version 3.0b, using the audio interrupts for rewriting the
audio location and length registers makes a timer wait superfluous.
This guarantees a smooth replay of loop samples with a repeat point
of NULL instead of the usual cracking sound generated by the first
cleared sample data word.
- Some of the tools also got improved:
* WhichMOD V.1.5
+ Songspeed of NULL bpm is no longer displayed
+ Improved note info check in the patterns
+ Detection of Ultimate Soundtracker note cuts without an effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6
+ Used effect commands now displayed based on the logic of my overview
"Tracker Features V.1.0" with their different command formats 0-2
+ Internal song restart position of Noisetracker 2.x or Startrekker 1.x
modules with 4 or 8 channels now displayed
* UST2PT V.1.4
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Large samples of >32 kB now treated correctly
+ Detection and conversion of Ultimate Soundtracker note cuts without an
effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6
+ Now only for modules with a songspeed that is not 120 bpm, the song-
speed is multiplied by a factor. In case of 120 bpm, the standard
tempo of 125 bpm is used, because 120 bpm modules are usally replayed
in 50 fps/125 bpm (e.g. "STK.lepeltheme" of the game Sarcophaser)
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* OST2PT V.1.4
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Large samples of >32 kB now treated correctly
+ Detection and conversion of Ultimate Soundtracker note cuts without an
effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6 and converting them if possible
+ Now only for modules with a songspeed that is not 120 bpm, the song-
speed is multiplied by a factor. In case of 120 bpm, the standard
tempo of 125 bpm is used, because 120 bpm modules are usally replayed
in 50 fps/125 bpm.
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* ST2PT V.1.3
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Improved note info check in the patterns.
+ Large samples of >32 kB now treated correctly
+ There may be some Soundtracker modules with a speed command which sets
the speed to a value > 15 ticks. If so, the Soundtracker compatible
maximum of 15 ticks is set in the pattern
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* NT2PT V.1.0 (new)
+ If the internal song restart position is 1..127, an additional "end"-
pattern with a "Position Jump restartpos" effect command is set in
the first position of the additional pattern to ensure Protracker
compability
+ Some Noisetracker modules (e.g. MOD.load master loading) have a speed
command that sets > 31 ticks cause problems on the Protracker that
interprets these values as tempo values. A speed > 31 ticks is set
to the Noisetracker/Startrekker compatible maximum value of 31 ticks
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* SplitMOD V.2.0
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ More precise error message if the length of the samples file will be
NULL bytes
again an update of the "Ultimate Tracker Support" (UTS) from Resistance: http://aminet.net/util/cli/RSE-UTS.lha
V.1.5 - Brief overview of the changes
- Replay routines:
* NT-Replay2.0_000_0x0 V.4.1
Now "Tone Portamento" doesn't call CheckMoreEffects anymore, if
wanted period equals note period. I didn't consider this special
case of the original Noisetracker/Startrekker replay routine yet.
* PT-Replay2.3a_000_0x0 V.4.1
Retrig note / Note Delay interrupt routine improved and optimized.
* PT-Replay2.4_000_0x0 V.1.0 (new)
Based on version 2.3, using the audio interrupts for rewriting the
audio location and length registers makes a timer wait superfluous.
This guarantees a smooth replay of loop samples with a repeat point
of NULL instead of the usual cracking sound generated by the first
cleared sample data word.
* PT-Replay3.0b_000_0x0 V.3.9
Retrig note / Note Delay interrupt routine improved and optimized.
* PT-Replay3.1_000_0x0 V.1.0 (new)
Based on version 3.0b, using the audio interrupts for rewriting the
audio location and length registers makes a timer wait superfluous.
This guarantees a smooth replay of loop samples with a repeat point
of NULL instead of the usual cracking sound generated by the first
cleared sample data word.
- Some of the tools also got improved:
* WhichMOD V.1.5
+ Songspeed of NULL bpm is no longer displayed
+ Improved note info check in the patterns
+ Detection of Ultimate Soundtracker note cuts without an effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6
+ Used effect commands now displayed based on the logic of my overview
"Tracker Features V.1.0" with their different command formats 0-2
+ Internal song restart position of Noisetracker 2.x or Startrekker 1.x
modules with 4 or 8 channels now displayed
* UST2PT V.1.4
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Large samples of >32 kB now treated correctly
+ Detection and conversion of Ultimate Soundtracker note cuts without an
effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6
+ Now only for modules with a songspeed that is not 120 bpm, the song-
speed is multiplied by a factor. In case of 120 bpm, the standard
tempo of 125 bpm is used, because 120 bpm modules are usally replayed
in 50 fps/125 bpm (e.g. "STK.lepeltheme" of the game Sarcophaser)
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* OST2PT V.1.4
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Large samples of >32 kB now treated correctly
+ Detection and conversion of Ultimate Soundtracker note cuts without an
effect command
+ Considering special effect commands of the old Soundtracker 1-3 and
old DOC Soundtracker 4-6 and converting them if possible
+ Now only for modules with a songspeed that is not 120 bpm, the song-
speed is multiplied by a factor. In case of 120 bpm, the standard
tempo of 125 bpm is used, because 120 bpm modules are usally replayed
in 50 fps/125 bpm.
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* ST2PT V.1.3
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ Improved note info check in the patterns.
+ Large samples of >32 kB now treated correctly
+ There may be some Soundtracker modules with a speed command which sets
the speed to a value > 15 ticks. If so, the Soundtracker compatible
maximum of 15 ticks is set in the pattern
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* NT2PT V.1.0 (new)
+ If the internal song restart position is 1..127, an additional "end"-
pattern with a "Position Jump restartpos" effect command is set in
the first position of the additional pattern to ensure Protracker
compability
+ Some Noisetracker modules (e.g. MOD.load master loading) have a speed
command that sets > 31 ticks cause problems on the Protracker that
interprets these values as tempo values. A speed > 31 ticks is set
to the Noisetracker/Startrekker compatible maximum value of 31 ticks
+ More precise info which speed command could not be set if there are
not enough channels without an effect command at the first position
in the first played pattern
* SplitMOD V.2.0
+ Now directories, set with the Shell "CD" command, properly supported
and filename bug removed
+ More precise error message if the length of the samples file will be
NULL bytes