[announce] Syntracker 2
category: music [glöplog]
about the device cfg: yes, I know that definitely needs to be improved but since this kind of thing rarely changes I've simply been too lazy to make a UI for that. Look for "audio_device_index" in the config, the complete list of available devices (only ASIO works ATM) is printed on the console during startup (look for "devIdx=")
How do I set the output device for left/right?
It lists all my 16 possible output channels just fine, but to get a stereo output, I need to output left channel to my "1 Analog MF (1)" and left to "2 Analog MF (1)"
It lists all my 16 possible output channels just fine, but to get a stereo output, I need to output left channel to my "1 Analog MF (1)" and left to "2 Analog MF (1)"
(second one should be right, ofcourse) ;)
that's what the "audio_out_off" option is for . set it to the 'L' channel offset, the 'R' channel will be "audio_out_off + 1". You can tell the "off" from the console output, for example in my setup it looks like this:
in my setup, I set the offset to 0 and thereby select "Analog Out 1/2 L Delta-1010LT"
be careful to configure "audio_num_out" so that it is greater or equal to your "audio_out_off"
(yes, yes, hackish, I know.. ;))
Code:
[dbg] Audio::ListDevices:
devIdx=0 name="M-Audio Delta ASIO" apiName="ASIO"
maxInputCh=24 maxOutputCh=20
defLowInputLatency=0.00266667 defLowOutputLatency=0.00266667
defHighInputLatency=0.00266667 defHighOutputLatency=0.00266667
defSampleRate=48000
[dbg] input channels:
[dbg] #0 : "Analog In 1 Delta-1010LT"
[dbg] #1 : "Analog In 2 Delta-1010LT"
[dbg] #2 : "Analog In 3 Delta-1010LT"
[dbg] #3 : "Analog In 4 Delta-1010LT"
[dbg] #4 : "Analog In 5 Delta-1010LT"
[dbg] #5 : "Analog In 6 Delta-1010LT"
[dbg] #6 : "Analog In 7 Delta-1010LT"
[dbg] #7 : "Analog In 8 Delta-1010LT"
[dbg] #8 : "SPDIF In L Delta-1010LT"
[dbg] #9 : "SPDIF In R Delta-1010LT"
[dbg] #10 : "Monitor L Delta-1010LT"
[dbg] #11 : "Monitor R Delta-1010LT"
[dbg] #12 : "Analog In 1 Delta-1010LT"
[dbg] #13 : "Analog In 2 Delta-1010LT"
[dbg] #14 : "Analog In 3 Delta-1010LT"
[dbg] #15 : "Analog In 4 Delta-1010LT"
[dbg] #16 : "Analog In 5 Delta-1010LT"
[dbg] #17 : "Analog In 6 Delta-1010LT"
[dbg] #18 : "Analog In 7 Delta-1010LT"
[dbg] #19 : "Analog In 8 Delta-1010LT"
[dbg] #20 : "SPDIF In L Delta-1010LT"
[dbg] #21 : "SPDIF In R Delta-1010LT"
[dbg] #22 : "Monitor L Delta-1010LT"
[dbg] #23 : "Monitor R Delta-1010LT"
[dbg] output channels:
[dbg] #0 : "Analog Out 1/2 L Delta-1010LT"
[dbg] #1 : "Analog Out 1/2 R Delta-1010LT"
[dbg] #2 : "Analog Out 3/4 L Delta-1010LT"
[dbg] #3 : "Analog Out 3/4 R Delta-1010LT"
[dbg] #4 : "Analog Out 5/6 L Delta-1010LT"
[dbg] #5 : "Analog Out 5/6 R Delta-1010LT"
[dbg] #6 : "Analog Out 7/8 L Delta-1010LT"
[dbg] #7 : "Analog Out 7/8 R Delta-1010LT"
[dbg] #8 : "SPDIF Out L Delta-1010LT"
[dbg] #9 : "SPDIF Out R Delta-1010LT"
[dbg] #10 : "Analog Out 1/2 L Delta-1010LT"
[dbg] #11 : "Analog Out 1/2 R Delta-1010LT"
[dbg] #12 : "Analog Out 3/4 L Delta-1010LT"
[dbg] #13 : "Analog Out 3/4 R Delta-1010LT"
[dbg] #14 : "Analog Out 5/6 L Delta-1010LT"
[dbg] #15 : "Analog Out 5/6 R Delta-1010LT"
[dbg] #16 : "Analog Out 7/8 L Delta-1010LT"
[dbg] #17 : "Analog Out 7/8 R Delta-1010LT"
[dbg] #18 : "SPDIF Out L Delta-1010LT"
[dbg] #19 : "SPDIF Out R Delta-1010LT"
in my setup, I set the offset to 0 and thereby select "Analog Out 1/2 L Delta-1010LT"
be careful to configure "audio_num_out" so that it is greater or equal to your "audio_out_off"
(yes, yes, hackish, I know.. ;))
(wait: num_out needs to be at least +2 greater than the offset)
Have to check that out!
Hi everyone!
I just wanted to let you know that there is a new version available !
The most important news is that you can now use VST instruments and effects.
Here's a simple demosong I made with kb's V2 (multitimbral) synthesizer:
st2-VST-v2_rhodents-17Oct2010.ogg
Future updates will be posted on the ST2 homepage / dev.blog.
Have a nice sunday evening!
Greetings,
Bastian
I just wanted to let you know that there is a new version available !
The most important news is that you can now use VST instruments and effects.
Here's a simple demosong I made with kb's V2 (multitimbral) synthesizer:
st2-VST-v2_rhodents-17Oct2010.ogg
Future updates will be posted on the ST2 homepage / dev.blog.
Have a nice sunday evening!
Greetings,
Bastian